#!/bin/sh

# This script runs during upgrade from pre-6.0 to try to
# update /etc/default/dump1090-fa to the new-style
# config.

if [ $# -lt 2 ]
then
    echo "syntax: $0 path-to-config path-to-package-defaults" >&2
    exit 2
fi

OLDCONFIG="$1"
NEWCONFIG="${OLDCONFIG}.v6-upgrade"
BACKUPCONFIG="${OLDCONFIG}.pre-v6-upgrade"
PACKAGECONFIG="$2"

if [ ! -f $OLDCONFIG ]
then
    echo "$OLDCONFIG does not exist, nothing to upgrade" >&2
    exit 0
fi

if [ ! -f $PACKAGECONFIG ]
then
    echo "$PACKAGECONFIG does not exist, cannot continue" >&2
    exit 1
fi

if [ -f $BACKUPCONFIG ]
then
    echo "$BACKUPCONFIG already exists, I'm not going to clobber it" >&2
    exit 1
fi

# set some assumed defaults (5.0 dump1090 binary defaults if no command-line options are given)
ENABLED="no"
RECEIVER="rtlsdr"
RECEIVER_SERIAL=""
RECEIVER_GAIN="50"
WISDOM=""
ERROR_CORRECTION="no"
MAX_RANGE=""
NET_RAW_INPUT_PORTS="30001"
NET_RAW_OUTPUT_PORTS="30002"
NET_SBS_OUTPUT_PORTS="30003"
NET_BEAST_INPUT_PORTS="30004,30104"
NET_BEAST_OUTPUT_PORTS="30005"
EXTRAS_NET_RO_SIZE="0"
EXTRAS_NET_RO_INTERVAL="0"
EXTRAS_NET_HEARTBEAT="60"

# read the old config
. "$OLDCONFIG"

# if there's no CONFIG_STYLE, infer a version
if [ -z "$CONFIG_STYLE" ]
then
   if [ -n "$RECEIVER_OPTIONS" -o -n "$DECODER_OPTIONS" -o -n "$NET_OPTIONS" -o -n "$JSON_OPTIONS" ]
   then
       CONFIG_STYLE=5
   else
       CONFIG_STYLE=6
   fi
fi

if [ "$CONFIG_STYLE" = "6" ]
then
    echo "$OLDCONFIG seems to already be a new-style config, nothing to upgrade" >&2
    exit 0
fi

# process all the options from the old config file and accumulate settings in env vars
process_options() {
    while [ $# -gt 0 ]
    do
        opt="$1"
        shift
        case "$opt" in
            --device-type)   RECEIVER="$1"; shift ;;
            --device-index)  RECEIVER_SERIAL="$1"; shift ;;
            --gain)          RECEIVER_GAIN="$1"; shift ;;
            --max-range)     MAX_RANGE="$1"; shift ;;
            --fix)           ERROR_CORRECTION="yes" ;;
            --net)           ;;
            --net-ri-port)   NET_RAW_INPUT_PORTS="$1"; shift ;;
            --net-ro-port)   NET_RAW_OUTPUT_PORTS="$1"; shift ;;
            --net-sbs-port)  NET_SBS_OUTPUT_PORTS="$1"; shift ;;
            --net-bi-port)   NET_BEAST_INPUT_PORTS="$1"; shift ;;
            --net-bo-port)   NET_BEAST_OUTPUT_PORTS="$1"; shift ;;
            --json-location-accuracy) JSON_LOCATION_ACCURACY="$1"; shift ;;
            --wisdom)        WISDOM="$1"; shift ;;

            --ppm)             EXTRAS_PPM="$1"; shift ;;
            --net-heartbeat)   EXTRAS_NET_HEARTBEAT="$1"; shift ;;
            --net-ro-size)     EXTRAS_NET_RO_SIZE="$1"; shift ;;
            --net-ro-interval) EXTRAS_NET_RO_INTERVAL="$1"; shift ;;

            *) EXTRA_OPTIONS="$EXTRA_OPTIONS ${opt}" ;;
        esac
    done
}

process_options $RECEIVER_OPTIONS $DECODER_OPTIONS $NET_OPTIONS $JSON_OPTIONS

# update EXTRA_OPTIONS for any non-default special settings
if [ "${EXTRAS_PPM:-0}" != "0" ]; then EXTRA_OPTIONS="$EXTRA_OPTIONS --ppm $EXTRAS_PPM"; fi
if [ "${EXTRAS_NET_HEARTBEAT:-60}" != "60" ]; then EXTRA_OPTIONS="$EXTRA_OPTIONS --net-heartbeat $EXTRAS_NET_HEARTBEAT"; fi
if [ "${EXTRAS_NET_RO_SIZE:-1300}" != "1300" ]; then EXTRA_OPTIONS="$EXTRA_OPTIONS --net-ro-size $EXTRAS_NET_RO_SIZE"; fi
if [ "${EXTRAS_NET_RO_INTERVAL:-1300}" != "0.2" ]; then EXTRA_OPTIONS="$EXTRA_OPTIONS --net-ro-interval $EXTRAS_NET_RO_INTERVAL"; fi

# special case for device index 0 (the default)
if [ "${RECEIVER_SERIAL}" = "0" ]; then RECEIVER_SERIAL=""; fi

# special case for gain -10 -> gain 60
if [ "${RECEIVER_GAIN}" = "-10" ]; then RECEIVER_GAIN="60"; fi

# special case for ports set to zero (new config uses a blank entry for that)
if [ "${NET_RAW_INPUT_PORTS}" = "0" ]; then NET_RAW_INPUT_PORTS=""; fi
if [ "${NET_RAW_OUTPUT_PORTS}" = "0" ]; then NET_RAW_OUTPUT_PORTS=""; fi
if [ "${NET_SBS_INPUT_PORTS}" = "0" ]; then NET_SBS_OUTPUT_PORTS=""; fi
if [ "${NET_BEAST_INPUT_PORTS}" = "0" ]; then NET_BEAST_INPUT_PORTS=""; fi
if [ "${NET_BEAST_OUTPUT_PORTS}" = "0" ]; then NET_BEAST_OUTPUT_PORTS=""; fi

SEDSCRIPT=$(mktemp -t dump1090XXX.sed)

# set up the sedscript
# nb: all values either derived from env vars or the package defaults,
# except for adaptive gain settings which we default to off on upgraded
# installs. New installs using the package defaults will default to on.
cat >>$SEDSCRIPT <<EOF
s@^ENABLED=.*@ENABLED=${ENABLED}@
s@^RECEIVER=.*@RECEIVER=${RECEIVER}@
s@^RECEIVER_SERIAL=.*@RECEIVER_SERIAL="${RECEIVER_SERIAL}"@
s@^RECEIVER_GAIN=.*@RECEIVER_GAIN=${RECEIVER_GAIN}@
s@^WISDOM=.*@WISDOM=${WISDOM}@
s@^ERROR_CORRECTION=.*@ERROR_CORRECTION=${ERROR_CORRECTION}@
s@^MAX_RANGE=.*@MAX_RANGE=${MAX_RANGE}@
s@^NET_RAW_INPUT_PORTS=.*@NET_RAW_INPUT_PORTS=${NET_RAW_INPUT_PORTS}@
s@^NET_RAW_OUTPUT_PORTS=.*@NET_RAW_OUTPUT_PORTS=${NET_RAW_OUTPUT_PORTS}@
s@^NET_SBS_OUTPUT_PORTS=.*@NET_SBS_OUTPUT_PORTS=${NET_SBS_OUTPUT_PORTS}@
s@^NET_BEAST_INPUT_PORTS=.*@NET_BEAST_INPUT_PORTS=${NET_BEAST_INPUT_PORTS}@
s@^NET_BEAST_OUTPUT_PORTS=.*@NET_BEAST_OUTPUT_PORTS=${NET_BEAST_OUTPUT_PORTS}@
s@^JSON_LOCATION_ACCURACY=.*@JSON_LOCATION_ACCURACY=${JSON_LOCATION_ACCURACY}@
s@^EXTRA_OPTIONS=.*@EXTRA_OPTIONS="$EXTRA_OPTIONS"@
s@^ADAPTIVE_DYNAMIC_RANGE=.*@ADAPTIVE_DYNAMIC_RANGE=no@
s@^ADAPTIVE_BURST=.*@ADAPTIVE_BURST=no@
EOF

# substitute into the standard config file to generate our customized config
if ! sed -f $SEDSCRIPT <$PACKAGECONFIG >$NEWCONFIG
then
    echo "Something went wrong trying to upgrade $OLDCONFIG, giving up.." >&2
    exit 1
fi
rm $SEDSCRIPT

# back up the old config and install the new config
if ! cp -p $OLDCONFIG $BACKUPCONFIG
then
    echo "Something went wrong trying to back up $OLDCONFIG, giving up.." >&2
    exit 1
fi

if ! mv $NEWCONFIG $OLDCONFIG
then
    echo "Something went wrong trying to install the new version of $NEWCONFIG, giving up.." >&2
    exit 1
fi

# all good
cat >&2 <<EOF
Upgraded existing config $OLDCONFIG to the new config syntax.
Please doublecheck that it looks ok!
The old config file has been preserved at $BACKUPCONFIG
EOF

exit 0