Fix package version (oops)

(cherry picked from commit 0305eb25e5)

debian/changelog

@@ -1,3 +1,19 @@
+dump1090-mr (1.10.3010.14-1) unstable; urgency=medium
+
+  * Version-only rebuild to fix the package version number
+    to reflect the currently merged upstream version, not the
+    older version when I started packaging (oops!)
+
+ -- Oliver Jowett <oliver@mutability.co.uk>  Sun, 04 Jan 2015 12:41:53 +0000
+
+dump1090-mr (1.08.2302.14+1-3) unstable; urgency=medium
+
+  * Remove spurious dependencies on net-tools
+  * Update Build-Depends based on glitches found building under pbuilder.
+  * Update package configuration and support scripts based on those from dump1090-mutability.
+
+ -- Oliver Jowett <oliver@mutability.co.uk>  Sun, 28 Dec 2014 15:05:40 +0000
+
 dump1090-mr (1.08.2302.14+1-2) unstable; urgency=medium
 
   * Pass --name / --user to start-stop-daemon when starting

debian/config-template

@@ -1,99 +1,99 @@
-# Defaults for dump1090-mr
-# This is a POSIX shell fragment
+## TEMPLATE FILE - This is used to create /etc/default/dump1090-mr ##
+## The first three lines will be discarded                         ##
+
+# dump1090-mr configuration file
+# This is a POSIX shell fragment.
+# You can edit this file directly, or use
+# "dpkg-reconfigure dump1090-mr"
 
 # Set to "yes" to start dump1090 on boot.
-START_DUMP1090="no"
+START_DUMP1090=
 
 # User to run dump1090 as.
-DUMP1090_USER="dump1090"
+DUMP1090_USER=
 
 # Logfile to log to
-#LOGFILE="/var/log/dump1090-mr.log"
-
-#
-# The following options are all optional - defaults if not provided are
-# shown below.
-#
+LOGFILE=
 
 #
 # Receiver options
 #
 
-# RTLSDR device index to use
+# RTLSDR device index or serial number to use
 # If set to "none", dump1090 will be started in --net-only mode
-#DEVICE=0
+DEVICE=
 
 # RTLSDR gain in dB.
 # If set to "max" (the default) the maximum supported gain is used.
 # If set to "agc", the tuner AGC is used to set the gain.
-#GAIN=max
+GAIN=
 
 # RTLSDR frequency correction in PPM
-#PPM=0
+PPM=
+
+# If yes, enables phase-enhancement of messages
+PHASE_ENHANCE=
 
 #
 # Decoding options
 #
 
 # If yes, fixes messages with correctable CRC errors.
-# Otherwise, discards messages with errors.
-#FIX_CRC=no
-
-# If yes, enables phase-enhancement of messages that fail to decode
-# the first time around.
-#PHASE_ENHANCE=no
+FIX_CRC=
 
 # If yes, enables aggressive fixes to damaged messages.
 # Use with caution - it can increase the rate of undetected errors.
-#AGGRESSIVE=no
+AGGRESSIVE=
 
 # If set, supplies a reference location for local position decoding.
-#LAT=decimal.latitude.value
-#LON=decimal.longitude.value
+LAT=
+LON=
 
 #
 # Networking options
 #
 
 # Port to listen on for HTTP connections. 0 disables.
-#HTTP_PORT=8080
+HTTP_PORT=
 
 # Port to listen on for raw (AVR-format) input connections. 0 disables.
-#RAW_INPUT_PORT=30001
+RAW_INPUT_PORT=
 
 # Port to listen on for raw (AVR-format) output connections. 0 disables.
-#RAW_OUTPUT_PORT=30002
+RAW_OUTPUT_PORT=
 
 # Port to listen on for SBS-format output connections. 0 disables.
-#SBS_OUTPUT_PORT=30003
+SBS_OUTPUT_PORT=
 
 # Port to listen on for Beast-format input connections. 0 disables.
-#BEAST_INPUT_PORT=30004
+BEAST_INPUT_PORT=
 
 # Port to listen on for Beast-format output connections. 0 disables.
-#BEAST_OUTPUT_PORT=30005
+BEAST_OUTPUT_PORT=
 
 # TCP heartbeat interval in seconds. 0 disables.
-#NET_HEARTBEAT=60
+NET_HEARTBEAT=
 
 # Minimum output buffer size per write, in bytes.
-#NET_OUTPUT_SIZE=5
+NET_OUTPUT_SIZE=
 
 # Maximum buffering time before writing. In units of approx 64ms (don't ask..).
-#NET_OUTPUT_RATE=5
+NET_OUTPUT_RATE=
 
-# TCP buffer size order. Power-of-two based - buffer size is 2^(n+16).
-#NET_BUFFER=0
+# TCP buffer size, in bytes
+NET_BUFFER=
 
 # Bind ports on a particular address. If unset, binds to all interfaces.
-#BIND_ADDRESS=
+# This defaults to binding to localhost. If you need to allow remote
+# connections, change this.
+NET_BIND_ADDRESS=
 
 #
 # Misc options
 #
 
 # Interval (in seconds) between logging stats to the logfile. 0 disables.
-#STATS_INTERVAL=3600
+STATS_INTERVAL=
 
 # Additional options that are passed to the Daemon.
-#EXTRA_ARGS=""
+EXTRA_ARGS=

debian/control

@@ -2,14 +2,14 @@ Source: dump1090-mr
 Section: embedded
 Priority: extra
 Maintainer: Oliver Jowett <oliver@mutability.co.uk>
-Build-Depends: debhelper(>=8), net-tools, librtlsdr-dev
+Build-Depends: debhelper(>=8), librtlsdr-dev, libusb-1.0-0-dev, pkg-config
 Standards-Version: 3.9.3
 Homepage: https://github.com/MalcolmRobb/dump1090
 Vcs-Git: https://github.com/mutability/dump1090.git -b mr-pi-package
 
 Package: dump1090-mr
 Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, net-tools, adduser
+Depends: ${shlibs:Depends}, ${misc:Depends}, adduser
 Description: ADS-B Ground Station System for RTL-SDR
  Networked Aviation Mode S / ADS-B decoder/translator with RTL-SDR software
  defined radio USB device support.

debian/dump1090-mr.config

@@ -0,0 +1,201 @@
+#!/bin/sh
+
+NAME=dump1090-mr
+CONFIGFILE=/etc/default/$NAME
+set -e
+. /usr/share/debconf/confmodule
+
+db_set_yn() {
+  if [ "x$2" = "xyes" ]; then db_set $1 true; else db_set $1 false; fi
+}
+
+# Load config file, if it exists.
+if [ -e $CONFIGFILE ]; then
+  . $CONFIGFILE || true
+
+  # Store values from config file into
+  # debconf db.
+
+  db_set_yn $NAME/auto-start "$START_DUMP1090"
+  db_set $NAME/run-as-user "$DUMP1090_USER"
+  db_set $NAME/log-file "$LOGFILE"
+
+  db_set $NAME/rtlsdr-device "$DEVICE"
+  db_set $NAME/rtlsdr-gain "$GAIN"
+  db_set $NAME/rtlsdr-ppm "$PPM"
+
+  db_set_yn $NAME/decode-fixcrc "$FIX_CRC"
+  db_set_yn $NAME/decode-phase-enhance "$PHASE_ENHANCE"
+  db_set_yn $NAME/decode-aggressive "$AGGRESSIVE"
+  db_set $NAME/decode-lat "$LAT"
+  db_set $NAME/decode-lon "$LON"
+
+  db_set $NAME/net-http-port "$HTTP_PORT"
+  db_set $NAME/net-ri-port "$RAW_INPUT_PORT"
+  db_set $NAME/net-ro-port "$RAW_OUTPUT_PORT"
+  db_set $NAME/net-bi-port "$BEAST_INPUT_PORT"
+  db_set $NAME/net-bo-port "$BEAST_OUTPUT_PORT"
+  db_set $NAME/net-sbs-port "$SBS_OUTPUT_PORT"
+  db_set $NAME/net-heartbeat "$NET_HEARTBEAT"
+  db_set $NAME/net-out-size "$NET_OUTPUT_SIZE"
+  db_set $NAME/net-out-rate "$NET_OUTPUT_RATE"
+  db_set $NAME/net-buffer "$NET_BUFFER"
+  db_set $NAME/net-bind-address "$NET_BIND_ADDRESS"
+
+  db_set $NAME/stats-interval "$STATS_INTERVAL"
+  db_set $NAME/extra-args "$EXTRA_ARGS"
+fi
+
+# Ask questions.
+
+db_input_verify() {
+  # $1 = priority
+  # $2 = db key
+  # $3 = verification function, should return 0 if OK
+  PRI=$1; KEY=$2; VERIFY=$3
+
+  set +e
+  db_input $PRI $KEY; RESULT=$?
+  db_go
+  set -e
+  ASKED=0
+  while :
+  do
+    db_get $KEY
+    if $VERIFY $RET; then return 0; fi
+    if [ $RESULT -ne 0 ]; then
+      # db_input failed, and the existing value does not validate
+      if [ $RESULT = 30 ] && [ $ASKED = 0 ]
+      then
+       # question was skipped, but existing value is invalid
+       # bump priority and try again (once)
+       PRI=high
+       ASKED=1
+      else
+       # give up, use the default value
+       db_reset $KEY
+       return 0
+      fi
+    else 
+     # db_input was OK, but the value did not verify.
+     # show an error message
+     db_input high dump1090-mr/invalid-$VERIFY || true
+    fi
+
+    # try again
+    set +e
+    db_fset $KEY seen false
+    db_input high $KEY; RESULT=$?
+    db_go
+    set -e
+  done
+}
+       
+is_unsigned_int() {
+  if echo "$1" | grep -Eq '^(0|+?[1-9][0-9]*)$'; then return 0; else return 1; fi
+}
+
+is_unsigned_int_or_empty() {
+  if [ -z "$1" ]; then return 0
+  elif is_unsigned_int "$1"; then return 0
+  else return 1; fi
+}
+
+is_signed_int() {
+  if echo "$1" | grep -Eq '^(0|[+-]?[1-9][0-9]*)$'; then return 0; else return 1; fi
+}
+
+is_signed_int_or_empty() {
+  if [ -z "$1" ]; then return 0
+  elif is_signed_int "$1"; then return 0
+  else return 1; fi
+}
+
+is_ipaddrish() {
+  if echo "$1" | grep -Eq '^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$'; then return 0; else return 1; fi
+}
+
+is_ipaddrish_or_empty() {
+  if [ -z "$1" ]; then return 0
+  elif is_ipaddrish "$1"; then return 0
+  else return 1; fi
+}
+
+is_number() {
+  if echo "$1" | grep -Eq '^(0|[+-]?[1-9][0-9]*)(\.[0-9]+)?$'; then return 0; else return 1; fi
+}
+
+is_number_or_empty() {
+  if [ -z "$1" ]; then return 0
+  elif is_number "$1"; then return 0;
+  else return 1; fi
+}
+
+is_valid_gain() {
+  if is_number "$1"; then return 0;
+  elif [ "$1" = "max" ]; then return 0;
+  elif [ "$1" = "agc" ]; then return 0;
+  else return 1; fi
+}
+
+is_not_empty() {
+  if [ -z "$1" ]; then return 1; else return 0; fi
+}    
+
+is_port_number() {
+  if is_unsigned_int "$1"; then
+    if [ "$1" -eq 0 ]; then return 0; fi
+    if [ "$1" -lt 1024 ]; then return 1; fi
+    if [ "$1" -gt 65535 ]; then return 1; fi
+    return 0
+  else
+    return 1
+  fi
+}
+
+db_input high $NAME/auto-start || true
+
+db_go || true; db_get $NAME/auto-start; if [ "$RET" = "true" ]; then
+ # all of these are only relevant if the init script is enabled
+
+ db_input_verify low $NAME/run-as-user is_not_empty || true
+ db_input_verify low $NAME/log-file is_not_empty || true
+
+ db_input medium $NAME/rtlsdr-device || true
+
+ db_go || true; db_get $NAME/rtlsdr-device; if [ "x$RET" != "xnone" ]; then
+  # only if a real device was chosen:
+  db_input_verify medium $NAME/rtlsdr-gain is_valid_gain || true
+  db_input_verify medium $NAME/rtlsdr-ppm is_signed_int || true
+ fi
+
+ db_input low $NAME/decode-fix-crc || true
+ db_input low $NAME/decode-aggressive || true
+ db_input_verify medium $NAME/decode-lat is_number_or_empty || true
+
+ db_go || true; db_get $NAME/decode-lat; if [ -n "$RET" ]; then
+  # only if latitude was given:
+  db_input_verify medium $NAME/decode-lon is_number_or_empty || true
+ fi
+
+ db_input_verify medium $NAME/net-http-port is_port_number || true
+ db_input_verify low $NAME/net-ri-port is_port_number || true
+ db_input_verify low $NAME/net-ro-port is_port_number || true
+ db_input_verify low $NAME/net-bi-port is_port_number || true
+ db_input_verify low $NAME/net-bo-port is_port_number || true
+ db_input_verify low $NAME/net-sbs-port is_port_number || true
+ db_input_verify low $NAME/net-heartbeat is_unsigned_int || true
+ db_input_verify low $NAME/net-out-size is_unsigned_int || true
+ db_input_verify low $NAME/net-out-rate is_unsigned_int || true
+ db_input_verify low $NAME/net-buffer is_unsigned_int || true
+ db_input_verify medium $NAME/net-bind-address is_ipaddrish_or_empty || true
+
+ db_input_verify low $NAME/stats-interval is_unsigned_int || true
+
+ db_input low $NAME/extra-args || true
+ 
+ db_go || True
+fi
+
+# Done.
+db_stop

debian/dump1090-mr.init

@@ -15,9 +15,9 @@
 
 # PATH should only include /usr/* if it runs after the mountnfs.sh script
 PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="dump1090-mr daemon"
 NAME=dump1090-mr
-DAEMON=/usr/bin/$NAME
+DESC="$NAME daemon"
+DAEMON=/usr/bin/dump1090-mr
 ARGS="--quiet"
 PIDFILE=/var/run/$NAME.pid
 SCRIPTNAME=/etc/init.d/$NAME
@@ -25,37 +25,22 @@ SCRIPTNAME=/etc/init.d/$NAME
 # Exit if the package is not installed
 [ -x "$DAEMON" ] || exit 0
 
-# Set defaults:
-START_DUMP1090=no
-DUMP1090_USER=dump1090
-LOGFILE=/var/log/$NAME.log
-DEVICE=0
-GAIN=max
-PPM=0
-FIX_CRC=no
-PHASE_ENHANCE=no
-AGGRESSIVE=no
-LAT=
-LON=
-HTTP_PORT=8080
-RAW_INPUT_PORT=30001
-RAW_OUTPUT_PORT=30002
-SBS_OUTPUT_PORT=30003
-BEAST_INPUT_PORT=30004
-BEAST_OUTPUT_PORT=30005
-NET_HEARTBEAT=60
-NET_OUTPUT_SIZE=5
-NET_OUTPUT_RATE=5
-NET_BUFFER=0
-BIND_ADDRESS=
-STATS_INTERVAL=3600
-EXTRA_ARGS=
-
 # Read configuration variable file if it is present
 [ -r /etc/default/$NAME ] && . /etc/default/$NAME
 
 # work out daemon args
 
+# sanitize missing settings
+[ -z "$START_DUMP1090" ] && START_DUMP1090=no
+[ -z "$DUMP1090_USER" ] && DUMP1090_USER="missing-DUMP1090_USER-setting-in-config"
+[ -z "$HTTP_PORT" ] && HTTP_PORT=0
+[ -z "$RAW_INPUT_PORT" ] && RAW_INPUT_PORT=0
+[ -z "$RAW_OUTPUT_PORT" ] && RAW_OUTPUT_PORT=0
+[ -z "$SBS_OUTPUT_PORT" ] && SBS_OUTPUT_PORT=0
+[ -z "$BEAST_INPUT_PORT" ] && BEAST_INPUT_PORT=0
+[ -z "$BEAST_OUTPUT_PORT" ] && BEAST_OUTPUT_PORT=0
+[ -z "$NET_BUFFER" ] && NET_BUFFER=0
+
 # receiver:
 case "x$DEVICE" in
  x|x0) ARGS="$ARGS --net" ;;
@@ -67,7 +52,7 @@ case "x$GAIN" in
  xagc) ARGS="$ARGS --gain -10" ;;  
  *) ARGS="$ARGS --gain $GAIN" ;;
 esac
-if [ "x$PPM" != "x0" ]; then ARGS="$ARGS --ppm $PPM"; fi
+if [ -n "$PPM" ]; then ARGS="$ARGS --ppm $PPM"; fi
 
 # decoder:
 if [ "x$FIX_CRC" = "xyes" ]; then ARGS="$ARGS --fix"; fi
@@ -77,20 +62,23 @@ if [ -n "$LAT" ]; then ARGS="$ARGS --lat $LAT"; fi
 if [ -n "$LON" ]; then ARGS="$ARGS --lon $LON"; fi
 
 # net:
-if [ "x$HTTP_PORT" != "x8080" ]; then ARGS="$ARGS --net-http-port $HTTP_PORT"; fi
-if [ "x$RAW_INPUT_PORT" != "x30001" ]; then ARGS="$ARGS --net-ri-port $RAW_INPUT_PORT"; fi
-if [ "x$RAW_OUTPUT_PORT" != "x30002" ]; then ARGS="$ARGS --net-ro-port $RAW_OUTPUT_PORT"; fi
-if [ "x$SBS_OUTPUT_PORT" != "x30003" ]; then ARGS="$ARGS --net-sbs-port $SBS_OUTPUT_PORT"; fi
-if [ "x$BEAST_INPUT_PORT" != "x30004" ]; then ARGS="$ARGS --net-bi-port $BEAST_INPUT_PORT"; fi
-if [ "x$BEAST_OUTPUT_PORT" != "x30005" ]; then ARGS="$ARGS --net-bo-port $BEAST_OUTPUT_PORT"; fi
-if [ "x$NET_HEARTBEAT" != "x60" ]; then ARGS="$ARGS --net-heartbeat $NET_HEARTBEAT"; fi
-if [ "x$NET_OUTPUT_SIZE" != "x0" ]; then ARGS="$ARGS --net-ro-size $NET_OUTPUT_SIZE"; fi
-if [ "x$NET_OUTPUT_RATE" != "x0" ]; then ARGS="$ARGS --net-ro-rate $NET_OUTPUT_RATE"; fi
-if [ "x$NET_BUFFER" != "x0" ]; then ARGS="$ARGS --net-buffer $NET_BUFFER"; fi
-if [ -n "$BIND_ADDRESS" ]; then ARGS="$ARGS --net-bind-address $BIND_ADDRESS"; fi
+
+ARGS="$ARGS --net-http-port $HTTP_PORT \
+--net-ri-port $RAW_INPUT_PORT --net-ro-port $RAW_OUTPUT_PORT \
+--net-bi-port $BEAST_INPUT_PORT --net-bo-port $BEAST_OUTPUT_PORT \
+--net-sbs-port $SBS_OUTPUT_PORT"
+if [ -n "$NET_HEARTBEAT" ]; then ARGS="$ARGS --net-heartbeat $NET_HEARTBEAT"; fi
+if [ -n "$NET_OUTPUT_SIZE" ]; then ARGS="$ARGS --net-ro-size $NET_OUTPUT_SIZE"; fi
+if [ -n "$NET_OUTPUT_RATE" ]; then ARGS="$ARGS --net-ro-rate $NET_OUTPUT_RATE"; fi
+if [ "$NET_BUFFER" -le "65536" ]; then ARGS="$ARGS --net-buffer 0"
+elif [ "$NET_BUFFER" -le "131072" ]; then ARGS="$ARGS --net-buffer 1"
+elif [ "$NET_BUFFER" -le "262144" ]; then ARGS="$ARGS --net-buffer 2"
+else ARGS="$ARGS --net-buffer 3"; fi
+if [ -n "$NET_BIND_ADDRESS" ]; then ARGS="$ARGS --net-bind-address $NET_BIND_ADDRESS"; fi
 
 # misc:
-if [ "x$STATS_INTERVAL" != "x0" ]; then ARGS="$ARGS --stats-every $STATS_INTERVAL"; fi
+if [ -n "$STATS_INTERVAL" ]; then ARGS="$ARGS --stats-every $STATS_INTERVAL"; fi
+
 if [ -n "$EXTRA_ARGS" ]; then ARGS="$ARGS $EXTRA_ARGS"; fi
 
 # Load the VERBOSE setting and other rcS variables
@@ -116,9 +104,10 @@ do_start()
             return 2
         fi
 
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --name $NAME --user $DUMP1090_USER --exec $DAEMON --test > /dev/null \
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --user $DUMP1090_USER --exec $DAEMON --test > /dev/null \
 		|| return 1
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --name $NAME --user $DUMP1090_USER --chuid $DUMP1090_USER --make-pidfile --background --no-close --exec $DAEMON -- \
+
+	start-stop-daemon --start --quiet --pidfile $PIDFILE --user $DUMP1090_USER --chuid $DUMP1090_USER --make-pidfile --background --no-close --exec $DAEMON -- \
 		$ARGS >>$LOGFILE 2>&1 \
 		|| return 2
         sleep 1
@@ -134,7 +123,7 @@ do_stop()
 	#   1 if daemon was already stopped
 	#   2 if daemon could not be stopped
 	#   other if a failure occurred
-	start-stop-daemon --stop --retry=TERM/30/KILL/5 --pidfile $PIDFILE --user $DUMP1090_USER --name $NAME
+	start-stop-daemon --stop --retry=TERM/30/KILL/5 --pidfile $PIDFILE --user $DUMP1090_USER --exec $DAEMON
 	RETVAL="$?"
 	[ "$RETVAL" = 2 ] && return 2
         sleep 1

debian/dump1090-mr.install

@@ -1 +1,2 @@
-public_html/* usr/share/dump1090-mr
+public_html/* usr/share/dump1090-mr/html
+debian/config-template usr/share/dump1090-mr

debian/dump1090-mr.postinst

@@ -17,10 +17,81 @@ set -e
 # for details, see http://www.debian.org/doc/debian-policy/ or
 # the debian-policy package
 
+NAME=dump1090-mr
+CONFIGFILE=/etc/default/$NAME
+TEMPLATECONFIG=/usr/share/$NAME/config-template
+SEDSCRIPT=$CONFIGFILE.sed.tmp
+
+subvar_raw() {
+  # $1 = db var value
+  # $2 = config var name
+
+  # if not present in the config file, add it
+  test -z "$1" || grep -Eq "^ *$2=" $CONFIGFILE || echo "$2=" >> $CONFIGFILE
+  # add to the sedscript
+  echo "s@^ *$2=.*@$2=\"$1\"@" >>$SEDSCRIPT
+}
+
+subvar() {
+  # $1 = db var name
+  # $2 = config var name
+  db_get $NAME/$1
+  subvar_raw "$RET" "$2"
+}
+
+subvar_yn() {
+  # $1 = db var name
+  # $2 = config var name
+  db_get $NAME/$1
+  if [ "$RET" = "true" ]; then subvar_raw "yes" "$2"; else subvar_raw "no" "$2"; fi
+}
 
 case "$1" in
     configure)
-        adduser --system --home /usr/share/dump1090-mr --no-create-home --quiet dump1090
+        . /usr/share/debconf/confmodule
+
+        # Generate config file, if it doesn't exist.
+        if [ ! -e $CONFIGFILE ]; then
+            tail -n +4 $TEMPLATECONFIG >$CONFIGFILE
+        fi
+
+        rm -f $SEDSCRIPT
+
+        subvar_yn auto-start START_DUMP1090
+        subvar run-as-user DUMP1090_USER
+        subvar log-file LOGFILE
+        subvar rtlsdr-device DEVICE
+        subvar rtlsdr-gain GAIN
+        subvar rtlsdr-ppm PPM
+        subvar_yn decode-fixcrc FIX_CRC
+        subvar_yn decode-phase-enhance PHASE_ENHANCE
+        subvar_yn decode-aggressive AGGRESSIVE
+        subvar decode-lat LAT
+        subvar decode-lon LON
+        subvar net-http-port HTTP_PORT
+        subvar net-ri-port RAW_INPUT_PORT
+        subvar net-ro-port RAW_OUTPUT_PORT
+        subvar net-bi-port BEAST_INPUT_PORT
+        subvar net-bo-port BEAST_OUTPUT_PORT
+        subvar net-sbs-port SBS_OUTPUT_PORT
+        subvar net-heartbeat NET_HEARTBEAT
+        subvar net-out-size NET_OUTPUT_SIZE
+        subvar net-out-rate NET_OUTPUT_RATE
+        subvar net-buffer NET_BUFFER
+        subvar net-bind-address NET_BIND_ADDRESS
+        subvar stats-interval STATS_INTERVAL
+        subvar extra-args EXTRA_ARGS
+
+        cp -a -f $CONFIGFILE $CONFIGFILE.tmp
+        sed -f $SEDSCRIPT < $CONFIGFILE > $CONFIGFILE.tmp
+        mv -f $CONFIGFILE.tmp $CONFIGFILE
+        rm $SEDSCRIPT
+
+        db_get $NAME/auto-start
+        if [ "$RET" = "true" ]; then
+          db_get $NAME/run-as-user
+          adduser --system --home /usr/share/$NAME --no-create-home --quiet "$RET"
+        fi
     ;;
 
     abort-upgrade|abort-remove|abort-deconfigure)
@@ -37,4 +108,5 @@ esac
 
 #DEBHELPER#
 
+if [ "$1" = "configure" ]; then db_stop; fi
 exit 0

debian/dump1090-mr.postrm

@@ -0,0 +1,41 @@
+#!/bin/sh
+# postrm script for #PACKAGE#
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+        rm -f /etc/default/dump1090-mr
+    ;;
+
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/dump1090-mr.templates

@@ -0,0 +1,238 @@
+Template: dump1090-mr/auto-start
+Description: Start dump1090 automatically?
+ dump1090 can be started automatically via an init-script.
+ Otherwise, the init-script does nothing; you must run dump1090 by hand.
+ .
+ You can modify the options used when automatically starting
+ dump1090 by running "dpkg-reconfigure dump1090-mr" as root,
+ or by editing /etc/default/dump1090-mr.
+Type: boolean
+Default: true
+
+Template: dump1090-mr/run-as-user
+Description: User to run dump1090 as:
+ When started automatically, dump1090 runs as an unprivileged system user. 
+ This user will be created if it does not yet exist.
+Type: string
+Default: dump1090
+
+Template: dump1090-mr/log-file
+Description: Path to log to:
+ When started automatically, dump1090 will log its output somewhere. This
+ log will contain any startup errors, and periodic statistics reports.
+Type: string
+Default: /var/log/dump1090-mr.log
+
+Template: dump1090-mr/rtlsdr-device
+Description: RTL-SDR dongle to use:
+ If you have only one dongle connected, you can leave this blank.
+ .
+ Otherwise, you can provide the serial number (more reliable) or device
+ index (first device = 0, but the ordering is unpredictable) to choose
+ a particular dongle to use.
+ .
+ To run dump1090 in "net only" mode, specify the literal word "none".
+Type: string
+Default:
+
+Template: dump1090-mr/rtlsdr-gain
+Description: RTL-SDR gain, in dB:
+ The tuner gain used by dump1090 can be provided as a value in dB, or
+ "max" to use the maximum gain available, or "agc" to use the tuner's AGC to
+ control the gain. If unsure, choose "max".
+Type: string
+Default: max
+
+Template: dump1090-mr/rtlsdr-ppm
+Description: RTL-SDR frequency correction, in PPM:
+ The oscillator in each RTL-SDL dongle is not perfectly accurate. You can
+ choose a correction factor, in parts-per-million, to correct for this. The
+ correction factor varies from dongle to dongle, and also varies with operating
+ temperature. You can find a suitable value with "rtl_test -p" or "kalibrate".
+ If you don't know the value for your dongle, choose 0.
+Type: string
+Default: 0
+
+Template: dump1090-mr/decode-fixcrc
+Description: Fix detected CRC errors?
+ dump1090 can fix unambiguous single-bit CRC errors detected in received
+ messages. This allows weaker messages to be decoded. It can slightly increase
+ the rate of undetected errors, but this is not usually significant.
+Type: boolean
+Default: true
+
+Template: dump1090-mr/decode-phase-enhance
+Description: Apply phase enhancement?
+ dump1090 can attempt to correct for messages that are received
+ out-of-phase from the sampling rate, at the expense of taking more CPU.
+Type: boolean
+Default: true
+
+Template: dump1090-mr/decode-aggressive
+Description: Aggressively fix more errors?
+ dump1090 can apply more aggressive corrections to received messages,
+ primarily correcting two-bit CRC errors.
+ .
+ Use with caution! This can significantly increase the rate of undetected
+ message errors (i.e. increase the rate of garbled decoded messages)
+Type: boolean
+Default: false
+
+Template: dump1090-mr/decode-lat
+Description: Latitude of receiver, in decimal degrees:
+ If the location of the receiver is provided, dump1090 can do
+ local position decoding in cases where insufficient position messages are
+ received for unambiguous global position decoding.
+Type: string
+Default:
+
+Template: dump1090-mr/decode-lon
+Description: Longitude of receiver, in decimal degrees:
+ If the location of the receiver is provided, dump1090 can do
+ local position decoding in cases where insufficient position messages are
+ received for unambiguous global position decoding.
+Type: string
+Default:
+
+Template: dump1090-mr/net-http-port
+Description: Port for internal webserver (0 disables):
+ dump1090 can provide an internal webserver that serves a basic "virtual
+ radar" map. You can select a port to listen on here.
+Type: string
+Default: 8080
+
+Template: dump1090-mr/net-ri-port
+Description: Port for AVR-format input connections (0 disables):
+ dump1090 can accept connections to receive data from other sources in 
+ several formats. This setting controls the port dump1090 will listen
+ on for AVR ("raw") format input connections.
+Type: string
+Default: 30001
+
+Template: dump1090-mr/net-ro-port
+Description: Port for AVR-format output connections (0 disables):
+ dump1090 can forward ADS-B messages to other software in several formats.
+ This setting controls the port dump1090 will listen on for AVR ("raw")
+ format output connections.
+Type: string
+Default: 30002
+
+Template: dump1090-mr/net-bi-port
+Description: Port for Beast-format input connections (0 disables):
+ dump1090 can accept connections to receive data from other sources in 
+ several formats. This setting controls the port dump1090 will listen
+ on for Beast ("binary") format input connections.
+Type: string
+Default: 30004
+
+Template: dump1090-mr/net-bo-port
+Description: Port for Beast-format output connections (0 disables):
+ dump1090 can forward ADS-B messages to other software in several formats.
+ This setting controls the port dump1090 will listen on for Beast ("binary")
+ format output connections.
+Type: string
+Default: 30005
+
+Template: dump1090-mr/net-sbs-port
+Description: Port for SBS-format output connections (0 disables):
+ dump1090 can forward ADS-B messages to other software in several formats.
+ This setting controls the port dump1090 will listen on for SBS BaseStation
+ format output connections.
+Type: string
+Default: 30003
+
+Template: dump1090-mr/net-heartbeat
+Description: Seconds between heartbeat messages (0 disables):
+ If there is no other data sent on a network connection, dump1090 can
+ periodically send an empty heartbeat message to ensure that the
+ connection stays established. This setting controls the interval
+ betweeen heartbeat messages.
+Type: string
+Default: 60
+
+Template: dump1090-mr/net-out-size
+Description: Minimum output message size:
+ To avoid sending many small network messages, output connections will
+ accumulate data waiting to be sent until either a minimum size is reached
+ or a maximum delay is reached. This setting controls the minimum size,
+ in bytes.
+Type: string
+Default: 500
+
+Template: dump1090-mr/net-out-rate
+Description: Maximum output buffering time:
+ To avoid sending many small network messages, output connections will
+ buffer data waiting to be sent until either a minimum size is reached
+ or a maximum delay is reached. This setting controls the maximum delay.
+ The units are multiples of approximately 64ms, for unhelpful
+ implementation reasons. The default value of 15 is about 1 second.
+Type: string
+Default: 15
+
+Template: dump1090-mr/net-buffer
+Description: SO_SNDBUF size:
+ Here you can specify the TCP send buffer size to use on network connections.
+Type: select
+Choices: 65536, 131072, 262144
+Default: 262144
+
+Template: dump1090-mr/net-bind-address
+Description: Interface address to bind to (blank for all interfaces):
+ If you want to limit incoming connections to a particular interface,
+ specify the interface address here. A blank value will bind to the wildcard
+ address, allowing connections on all interfaces.
+ .
+ The default value of 127.0.0.1 will allow connections only on localhost,
+ i.e. only connections that originate on the same machine.
+Type: string
+Default: 127.0.0.1
+
+Template: dump1090-mr/stats-interval
+Description: Interval between logging stats, in seconds:
+ dump1090 will periodically log message reception stats to its logfile.
+ This setting controls how often that is done.
+Type: string
+Default: 3600
+
+
+Template: dump1090-mr/extra-args
+Description: Extra arguments to pass to dump1090:
+ Here you can add any extra arguments you want to pass to dump1090.
+Type: string
+Default:
+
+Template: dump1090-mr/invalid-is_unsigned_int
+Description: Value must be an unsigned integer.
+Type: error
+
+Template: dump1090-mr/invalid-is_unsigned_int_or_empty
+Description: Value must be an unsigned integer, or blank.
+Type: error
+
+Template: dump1090-mr/invalid-is_signed_int
+Description: Value must be an integer.
+Type: error
+
+Template: dump1090-mr/invalid-is_signed_int_or_empty
+Description: Value must be an integer, or blank.
+Type: error
+
+Template: dump1090-mr/invalid-is_not_empty
+Description: Value cannot be empty.
+Type: error
+
+Template: dump1090-mr/invalid-is_port_number
+Description: Value must be a valid port number (1024-65535), or zero to disable.
+Type: error
+
+Template: dump1090-mr/invalid-is_ipaddrish_or_empty
+Description: Value must be an IP address or empty.
+Type: error
+
+Template: dump1090-mr/invalid-is_number_or_empty
+Description: Value must be a decimal number or empty.
+Type: error
+
+Template: dump1090-mr/invalid-is_valid_gain
+Description: Value must be a numeric gain value, or "max", or "agc".
+Type: error

debian/rules

@@ -15,7 +15,7 @@ DPKG_EXPORT_BUILDFLAGS = 1
 include /usr/share/dpkg/buildflags.mk
 
 override_dh_auto_build:
-	dh_auto_build -- 'EXTRACFLAGS=-DHTMLPATH=\"/usr/share/dump1090-mr\"'
+	dh_auto_build -- 'EXTRACFLAGS=-DHTMLPATH=\"/usr/share/dump1090-mr/html\"'
 
 override_dh_install:
 	dh_install