Commit Graph

156 Commits

Author SHA1 Message Date
Oliver Jowett 0793c64ee8 Clean up linkage of struct Modes to actually make sense.
(how did this work before? But it's been unchanged since at least
2013..)

Maybe fixes #65
2020-06-06 21:52:04 +08:00
Oliver Jowett 886b0d3f81 Treat ADS-R as a separate source type (higher priority than TIS-B, lower priority than direct ADS-B) 2019-12-11 12:43:19 -06:00
Oliver Jowett a224f6f783 Put a warning header up in view1090 interactive mode when there's no connection 2019-12-02 19:51:06 +08:00
Oliver Jowett 54409b4836 Split beast output into two separate writers for verbatim vs. non-verbatim
in preparation for supporting both types of connection in parallel
2019-11-27 21:01:46 +08:00
Oliver Jowett ce89cd08d9 Groundwork to track "reliable" messages & aircraft.
A "reliable" message is a DF17 or DF11 with good CRC.
A "reliable" aircraft is one that's probably real - we decide it's reliable when
we've seen enough reliable messages, or just enough messages in total, that it's unlikely
to be noise.
2019-11-27 20:51:23 +08:00
Oliver Jowett d33b1160f2 Add COMMB_AMBIGUOUS for Comm-B messages we're not sure of (not yet used) 2019-05-02 17:29:04 +08:00
Oliver Jowett f46640a5c2 Track and report autopilot FMS/MCP separately; also report autopilot altitude source. 2019-03-19 18:44:09 +00:00
Oliver Jowett 9dfc3e7aa6 Arrange to return a non-zero exit code if the SDR thread unexpectedly halts 2019-03-07 18:35:47 +00:00
Oliver Jowett f4fa94f842 Merge branch 'more_mode_s' into dev 2018-05-09 16:20:58 +01:00
Oliver Jowett ea1e9c336b Decode/emit emergency/priority status 2018-01-09 14:43:58 +00:00
Oliver Jowett 079061df3c SIL stuff 2017-12-07 13:36:07 -06:00
Oliver Jowett 161d2d8ded More WIP 2017-12-07 10:34:08 -06:00
Oliver Jowett 6986b3847f WIP on new faup1090 output, data aging, refactoring 2017-12-02 17:38:33 +00:00
Michael Tatarinov 196ef89aca Cleanup after removed internal webserver code.
Fixes: 52464b97c1
2017-07-28 11:35:26 +04:00
Oliver Jowett 382554a250 Tweak tracking of AP modes, emit in json & faup1090 output 2017-06-16 10:39:01 +01:00
Oliver Jowett 1ec32903ba Rework heading/track to include HRD/TAH.
Clean up TIS-B flag output.
2017-06-15 21:07:53 +01:00
Oliver Jowett 27b0e9c40f Rename TARGET_* -> INTENT_ALT_*
Rearrange the intent tracking a bit.
2017-06-15 18:23:28 +01:00
Oliver Jowett 2142d2edf5 Whitespace changes only: cleaning up trailing whitespace at EOL 2017-06-15 18:17:07 +01:00
Oliver Jowett 98d64483d6 WIP: More Comm-B & ADS-B decoding. 2017-06-15 18:07:40 +01:00
Oliver Jowett 417cda7061 Make SC16Q11-nodc conversions table-based for speed.
Add a mechanism for converters to initialize tables on demand.
Move UC8 table setup to the new lazy-setup path.
Fix uc8 lookup table allocation size.
2017-02-03 00:36:33 +00:00
Oliver Jowett cf9e3005e8 Add a bladeRF SDR type. 2017-02-03 00:30:42 +00:00
Oliver Jowett 75b221c0e3 Lots of refactoring to move the SDR-type-specific bits out of the
main code and make them optionally buildable.
2017-01-27 17:30:40 +00:00
Oliver Jowett 52464b97c1 Remove internal webserver code entirely. 2016-12-29 18:35:35 +00:00
Oliver Jowett 6336611bc7 Turn on mode A/C if a Beast connection asks for it.
Add a --no-modeac-auto option to disable this.
2016-12-29 17:56:32 +00:00
Oliver Jowett 4bb070be50 Add support for radarcape type 5 (receiver position) messages. 2016-12-27 19:07:10 +00:00
Oliver Jowett cc47718a2d Measure mean signal level in the converters.
Rearrange the meaning of the measured power level to be consistent
with the signal level.
2016-11-12 14:07:58 +00:00
Oliver Jowett d3fad32d5e Merge remote-tracking branch 'upstream/master' into dev 2016-10-14 21:35:31 +01:00
Oliver Jowett f6b1b94c7d Use ncurses for interactive mode (reduces flicker on slow connections a lot!) 2016-10-11 20:37:28 +01:00
Oliver Jowett 25ea6d398b Overhaul mode A/C matching to be much cheaper.
The old matching process which tracked mode A values as pseudo-aircraft
got very, very expensive with a large number of mode A/C messages (and
with lots of single-bit errors, which seems common with a Beast doing
the reception)

Instead just count A/C messages directly into a 4096-entry array (which
is very fast) and periodically scan the mode S aircraft list to see if
we can match anything up (which is fixed overhead + cost proportional
to the number of mode S aircraft)
2016-10-11 18:00:11 +01:00
Oliver Jowett 60f1f3bcb6 Table-ize the Mode A to C conversions, add a Mode C to Mode A conversion function. 2016-10-11 17:57:25 +01:00
Oliver Jowett 85d3ecee62 Add source & address type for Mode A/C 2016-10-11 17:55:02 +01:00
Oliver Jowett 52fe01c860 Track CPR encoding type directly rather than inferring it from airground.
(airground can change even while airborne if SPI/Alert status gets set)
2016-10-02 00:16:29 +01:00
Oliver Jowett 729d91c1ab Fix up address type categorization to match the spec. 2016-09-15 15:30:34 +01:00
Oliver Jowett 50a606d23f Make it clearer that ADDR_ADSB_ICAO includes Mode S too. 2016-09-14 17:19:49 +01:00
Oliver Jowett 8d8443f3dc Track the "best" addrtype we ever saw for an aircraft. 2016-09-14 16:54:00 +01:00
Oliver Jowett 2a4aa29f03 Record the address type details when decoding. 2016-09-14 16:37:07 +01:00
Oliver Jowett 3e08de91ed WIP on decoding operational status & target state messages. 2016-08-29 11:11:04 +01:00
Oliver Jowett 54ca2c7fb2 WIP big rewrite of message decoding / aircraft tracking. 2016-08-27 14:34:14 +01:00
Oliver Jowett 8b8f8d7a40 Use INVALID_ALTITUDE in a few more places. 2016-08-26 21:38:06 +01:00
Oliver Jowett e4ceea33da Disable the internal webserver at build time. 2016-07-10 11:56:31 +01:00
Oliver Jowett 8f82e61f17 Remove the 2MHz demodulator.
Now that the 2.4MHz demodulator does 3A/C there's no real reason
to keep the old demodulator around.
2016-05-31 12:23:58 +01:00
Oliver Jowett b8dc3973d1 Always measure noise power, silently ignore --measure-noise if given. 2016-05-31 11:54:34 +01:00
Oliver Jowett d419b62a65 Always use phase enhancement; silently ignore --phase-enhance if given. 2016-05-31 11:47:57 +01:00
Oliver Jowett 93c135ea66 Remove a dead #define 2016-05-31 11:45:15 +01:00
Oliver Jowett 2b466535de Support multiple listening ports per listener type.
Beast input defaults to listening on both 30004 and 30104.
Drop the FATSV listener entirely (use faup1090 for that)
Ignore --net-beast.
2016-01-24 18:47:58 +00:00
Oliver Jowett d9eec668cf Track what data we got via TIS-B, report it as such. 2016-01-21 19:42:37 +00:00
Oliver Jowett 9479a5c9be If --hae is passed, report altitudes as HAE where available, with a H suffix.
This affects interactive mode and SBS output.
2016-01-01 15:15:28 +00:00
Oliver Jowett efd6b94310 Track HAE altitude separately to baro altitude where possible. 2016-01-01 13:42:30 +00:00
maxried 217e6f9216 Update dump1090.h 2015-09-14 20:44:52 +02:00
maxried 541f12fb21 Update dump1090.h 2015-09-14 20:11:00 +02:00