Add ability to set calibration bandwidth via input command line options.
By default the bandwidth is equal to 2.5 MHz.
Test: connect LimeSDR device, try to set different bandwidth and check
logs:
$ ./dump1090 --device-type limesdr --limesdr-bw 5000000
$ ./dump1090 --device-type limesdr --limesdr-bw 500000
Signed-off-by: Gluttton <gluttton@ukr.net>
Add ability to set LPF bandwidth via input command line options.
By default the bandwidth is equal to the default sample rate 2.4 MHz.
Test: connect LimeSDR device, try to set different bandwidth and check
logs:
$ ./dump1090 --device-type limesdr --limesdr-lpfbw 2500000
$ ./dump1090 --device-type limesdr --limesdr-lpfbw 500000
Signed-off-by: Gluttton <gluttton@ukr.net>
Add ability to set the combined normalized gain via command line
options. By default the gain is equal to 0.75.
Test: connect LimeSDR device, try to set different gain and check logs:
$ ./dump1090 --device-type limesdr --limesdr-gain 0.01
$ ./dump1090 --device-type limesdr --limesdr-gain 0.5
$ ./dump1090 --device-type limesdr --limesdr-gain 0.99
Signed-off-by: Gluttton <gluttton@ukr.net>
Add ability to set RF oversampling ratio via command line options. By
default the default value is used.
Test: none.
Signed-off-by: Gluttton <gluttton@ukr.net>
Add ability to select a desired LimeSDR device by serial number. It is
not necessary to pass a whole serial number, but its key part is enough.
The first device which serial contains the passed key is selected.
Test: connect LimeSDR device and try to select it by serial number,
below an example for a device with serial 0009081C05C00000:
OK: $ ./dump1090 --device-type limesdr --limesdr-serial 9
OK: $ ./dump1090 --device-type limesdr --limesdr-serial 90
OK: $ ./dump1090 --device-type limesdr --limesdr-serial 908
NG: $ ./dump1090 --device-type limesdr --limesdr-serial 999
It hasn't been tested with several devices!
Signed-off-by: Gluttton <gluttton@ukr.net>
Add ability to set verbosity level for LimeSDR messages via command line
options. The range of available levels is from 0 to 4 and defined by the
constants from the `LimeSuite.h` file:
- LMS_LOG_CRITICAL 0;
- LMS_LOG_ERROR 1;
- LMS_LOG_WARNING 2;
- LMS_LOG_INFO 3;
- LMS_LOG_DEBUG 4.
By default the verbosity level is 3 (INFO).
Test: launch the program with different verbosity level and ensure that
number of messages is changed, for example:
$ ./dump1090 --device-type limesdr --limesdr-verbosity 4
$ ./dump1090 --device-type limesdr --limesdr-verbosity 3
$ ./dump1090 --device-type limesdr
Signed-off-by: Gluttton <gluttton@ukr.net>
The commit provides a basic implementation of support for LimeSDR USB
receivers based on LMS7002 chip. The solution has several limitations:
- passing parameters for tune LimeSDR receiver via command-line
options is not implemented;
- only hardcoded configuration is used (channel 0 of lower band LNA,
LMS_FMT_I16 format, gain, bandwidth and timeout);
- only one device is supported and it is not possible to select a
desired one in case if several devices are connected to the host.
Test: compare the output of the program for RTL and LimeSDR receivers.
Environment:
- RTL2832SDR dongle;
- LMS7002M based USB LimeSDR board;
- 800MHz-2200MHz omnidirectional antenna with SMA connector.
Procedure:
- connect RTL dongle to the host and start the program with the
following parameters:
$ ./dump1090 --device-type rtlsdr --interactive
- wait until several planes will be detected;
- stop the program, connect the LimeSDR board to the host and restart
the program with the following parameters:
$ ./dump1090 --device-type limesdr --interactive
- ensure that the same planes are detected.
Acceptance criteria: the same planes are detected using both receivers
and track information matches with information from the
FlightRadar24 application.
Signed-off-by: Gluttton <gluttton@ukr.net>
When accessing Dump 1090 JSON from another web server, I found that the "Access-Control-Allow-Origin" parameter was set twice ("*, *") which Chrome objected to. By changing "add-response-header" to "set-response-header" we ensure that the correct header is sent, but never duplicated.
* Update openlayers to v6.3.1 and get existing source working with new version
* Organize ol source files a bit
Co-authored-by: erictran <eric.tran@flightaware.com>
* Front-end/styling of window with checkbox options to customize plane table columns
* Toggle checkbox functionality with persistence
* Toggle correct columns for each checkbox
* Add several more column options and fix up logic to show/hide columns
* Functional select/deselect all checkboxes; Needs optimization
* Set overflow-x to scroll on aircraft table
* Select Columns button styling
* Refactor toggleAllColumns()
* Separate legend from table scrolling
* Move aircraft table styling into css file
* Spacing
Co-authored-by: erictran <eric.tran@flightaware.com>
In recent versions of Firefox and (especially) Chrome, ".dev" domains are
force-redirected to a secure connection (HTTPS) instead of HTTP. Not
supporting an HTTPS connection makes for a bad user experience, so we want
to make enabling SSL support easy. Since we don't issue certificates, this
section is commented out by default, and it will require modification.
This is done primarily for PiAware, though it is applicable to just the
Dump1090 project.
--fix --fix was a poor choice for this, as some existing configs
happened to specify --fix twice but only expected 1-bit correction.
So move 2-bit correction to a separate option.
"--fix" or "--fix --fix" now gives 1-bit correction.
"--fix-2bit" or "--fix --fix-2bit" or "--fix-2bit --fix" gives 2-bit correction.
Version bump to 3.8.2~dev
Standard lighttpd will refuse to start if modules are loaded more than
once. Turn the module addition into a comment, explain why it's disabled
by default and in which cases you should enable it.
On some instances of lighttpd, like the one that comes with PiHole, the
alias module is not loaded by default. This makes the configuration of
PiAware's lighttpd not work (see e.g.
https://discourse.pi-hole.net/t/pi-hole-and-piaware-lighttpd/9611).
This way we ensure that the alias module is loaded even on non-default
lighttpd configurations.
Oliver Jowett
Gluttton
Ian Renton
eric1tran
Rosen Penev
John Berninger
Eric Tran
Claudio Moretti
Determinant